Train spray booth with customized design
Size: Outside Dimensions: 7120(L) ×5670(W) ×3350(H)mm or customized design
Inside Dimensions: 7000(L)×4000(W) ×2650(H)mm or customized design
Voltage: 380V, 50HZ, 3Phase or following local electrical code
Heating method: natural gas or customized requirments
Offer sample: No
Since the Train body paint is special products, and as we are the spray booth manufacturer, we can provide Train spray booth with customized design, which means from body cabin size, heating method, ventilation system, etc.
It is quipped with light at 45°, ceiling and wall lights, LED cold light source lighting tubes with tempered glass covered and the illuminance ≥1000Lux.
Powder coating makes it look nice and avoids rust.
It is of bag inlet filter cotton with large capacity, and imported CC-600G sub-high efficiency cotton filter with multilayer structure whose middle oily interlayer has high ahesive power to guarantee the air cleaness of dust content ≯ 1.5mg/m³， and max. dust particle ≯ 5μm.
C-profile steel top net frame structure is applied for easy installation and change of the filter materials on the top.
Forward- reverse direction change is available. It consists of section bar frame, 2 sets of YDW11 model 4KW fans with a flow of 25000m³/h. It is covered with generalized sheet, Upper inlet is designed with electric damper for transition between paint spraying and baking.
Exhaust system is equipped with 2 square tube and one elbow